Toni Technik Products

Combined test plant for the standard-compliant testing of the compressive and flexural strength of cement and other binding materials, preferably for efficient routine tests of:

• Prisms 40 x 40 x 160 mm accord. to EN 196 / ISO 679
• Cubes 50 mm (2 inch)  according to ASTM C109
• Cubes 70.7 mm according to BS 1881

The test plant ToniZEM is designed as automatic, servo-hydraulic machine in the accuracy class 1 according to 

EN ISO 7500-1 and DIN 51220.

Fully automatic testing plant for determining the compressive strength of building and other materials, preferably for efficient series testing of concrete cubes and cylinders. Available in sizes 2000 kN and 3000 kN. Design according to DIN 51220 and EN ISO 7500-1. 

For the storage of specimens in tempered water.

The jolting apparatus is designed for the compaction of mortar specimens 40x40x160 mm in moulds and conforms exactly to the requirements of the standards 

EN 196-1 and ISO 679.

Performance unit for the standard-compliant compaction of cement mortar and other binding materials according to EN 196, DIN 1164, ASTM C109 and other standards 

Standard-compliant operation according to EN 196-1, EN 196-3, EN 480-1, ASTM C305, ASTM C359, ASTM C451, ISO 679 and other standards. Automatic mixing of cement, mortar, gypsum and other materials including automated sand and water addition.

The water bath ToniCHAT allows the controlled boiling of binding agent samples for the determination of sound-ness respectively the stability of volume or rate of risk regarding a subsequent extension of the binding agent (cement) caused by hydration. The ToniCHAT corresponds exactly to the requirements of the standard DIN EN 1963 and performs an autonomous and controlled test cycle.

Instrument for the standard compliant testing of the expansion of Le Chatelier moulds without permanent deformation according to EN 196-3.

The ToniSET Classic is a PC-controlled needle instrument according to Vicat and is designed for the standardcompliant determination of the setting characteristics 

of cement and gypsum in accordance with EN 196-3, and EN 13279-2. The instrument enables the determination of the initial and the final setting as well as the determination of the total setting process.

Determination of the normal consistency of cement as well as the initial and final setting time in accordance with  EN 196 T3, DIN 1164, ASTM C 187 and C 191.

The ToniFORCE is a fully automatic penetrometer for recording the setting behaviour of building materials like 3D printing concrete, cement, gypsum or mortar. The recorded data allow the determination of both the setting behaviour and the penetration resistance.

The air permeability tester model 7201 is designed for the determination of the fineness of powders, especially of cement in accordance with the standards DIN 1164, 

EN 196-6 and ASTM C 204-11.

The air permeability tester ToniPERM is designed for the determination of the specific surface of powders, especially suitable for the permanent control of manufacturing characteristics in the daily laboratory work according to EN 196 and ASTM C 204.

The air permeability tester ToniPERM II is designed for the determination of the specific surface of powders, especially suitable for the permanent control of manufacturing characteristics in the daily laboratory work. This measuring procedure serves as practice oriented alternative for the standard procedures according to EN 196 as well as ASTM C 204. 

Device to determine the content of free, uncombined lime in cement and cement clinkers. The function principle is based on the measurement of the electric conductivity of a cement solution in hot glycol compared with calibration curves, determined with a two or multipoint calibration curve with reference material (reference material has to be provided by the customer).